IPC324LR3-VSPF28(40)-D compatible mounts & accessories
Every accessory below is listed for the IPC324LR3-VSPF28(40)-D (4MP Vandal-resistant Network IR Fixed Dome Camera) in the official Uniview datasheet. Variants covered: IPC324LR3-VSPF28-D, IPC324LR3-VSPF40-D.
Spec plate
- Form factor
- Dome
- Camera weight
- 450 g
- Dimensions
- Φ109 x 81mm (Ø4.3" x 3.2")
- Protection
- IP67, IK10
- PoE
- IEEE 802.3af
- DC power
- DC 12V±25%
- Max power
- 4 W
- Operating temp
- -30°C ~ 60°C (-22°F ~ 140°F), Humidity: ≤95% RH (non-condensing)
- Lens options
- 2.8mm, 4.0mm
- Source
- official datasheet (V1.8)
Compatible hardware
Every row below is listed in the official IPC324LR3-VSPF28(40)-D datasheet (V1.8), quoted verbatim so you can match it.
| Part number | Type | Relationship | Datasheet wording |
|---|---|---|---|
| TR-JB03-G-IN | Junction Mount | optional | Junction Mount TR-JB03-G-IN |
| TR-JB07/WM03-G-IN | Pole Mount | optional | Pole Mount TR-JB07/WM03-G-IN |
| TR-WM03-D-IN | Wall Mount | optional | TR-WM03-D-IN listed in accessories section |
| TR-UM06-E-IN | Junction Mount | optional | TR-UM06-E-IN listed in accessories section |
| TR-UP06-IN | Pole Mount | optional | TR-UP06-IN listed in accessories section |
| TR-A01-IN | Accessory | optional | TR-A01-IN listed in accessories section |
| TR-SE24-IN | Pole Mount | optional | TR-SE24-IN listed in accessories section |
| TR-SE24-A-IN | Pole Mount | optional | TR-SE24-A-IN listed in accessories section |
| TR-CM24-IN | Ceiling Mount | optional | TR-CM24-IN listed in accessories section |
IPC324LR3-VSPF28(40)-D full specifications
Key specs compiled from the official IPC324LR3-VSPF28(40)-D datasheet. Always confirm against the source before ordering.
Camera
- Image Sensor
- 1/3", progressive scan, 4.0 megapixel, CMOS
- Min Illumination (Colour)
- 0.03Lux (F2.0, AGC ON)
- Min Illumination (IR)
- 0Lux with IR
- Shutter
- Auto/Manual, 1 ~ 1/100000s
- WDR
- DWDR
- Day/Night
- IR-cut filter with auto switch (ICR)
- S/N Ratio
- >52dB
- Digital Noise Reduction
- 2D/3D DNR
- Defog
- Digital Defog
Lens
- Aperture (2.8mm)
- F2.0
- Aperture (4.0mm)
- F2.0
- Angle of View H (2.8mm)
- 104.4°
- Angle of View H (4.0mm)
- 78.9°
- Angle of View V (2.8mm)
- 54.4°
- Angle of View V (4.0mm)
- 39.6°
- Angle of View O (2.8mm)
- 135.7°
- Angle of View O (4.0mm)
- 97.0°
- Adjustment Angle
- Pan 0° ~ 360°, Tilt: 0° ~ 75°
IR
- IR Range
- Up to 30m (98ft)
- Wavelength
- 850nm
- IR On/Off Control
- Auto/Manual
- Smart IR
- Support
Video
- Video Compression
- Ultra 265, H.265, H.264, MJPEG
- H.264 Code Profile
- Baseline profile, Main Profile
- Main Stream Frame Rate
- 4MP (2592*1520), Max 20fps
- Sub Stream Frame Rate
- 720P (1280*720), Max 20fps
- Third Stream Frame Rate
- D1 (720*576), Max 20fps
- Video Bit Rate
- 128 Kbps~16 Mbps
- OSD
- Up to 4 OSDs
- Privacy Mask
- Up to 4 areas
- ROI
- Up to 2 areas
- Motion Detection
- Up to 4 areas
- HLC
- Supported
- BLC
- Supported
Network
- Interface
- 1 RJ45 100M Base-TX Ethernet
- Protocols
- IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL, QoS
- Compatible Integration
- ONVIF (Profile S, Profile T), API
Model variants
- IPC324LR3-VSPF28-D
- IPC324LR3-VSPF40-D
FAQ
What junction mount fits the IPC324LR3-VSPF28(40)-D?
According to the official IPC324LR3-VSPF28(40)-D datasheet, the junction mount options are TR-JB03-G-IN, TR-UM06-E-IN.
What pole mount fits the IPC324LR3-VSPF28(40)-D?
According to the official IPC324LR3-VSPF28(40)-D datasheet, the pole mount options are TR-JB07/WM03-G-IN, TR-UP06-IN, TR-SE24-IN, TR-SE24-A-IN.
What wall mount fits the IPC324LR3-VSPF28(40)-D?
According to the official IPC324LR3-VSPF28(40)-D datasheet, the wall mount option is TR-WM03-D-IN.
What accessory fits the IPC324LR3-VSPF28(40)-D?
According to the official IPC324LR3-VSPF28(40)-D datasheet, the accessory option is TR-A01-IN.
What ceiling mount fits the IPC324LR3-VSPF28(40)-D?
According to the official IPC324LR3-VSPF28(40)-D datasheet, the ceiling mount option is TR-CM24-IN.
Other dome cameras
Same form factor, also datasheet-checked for mount compatibility.
Always confirm against the official datasheet before ordering.